Find answers to your questions about 3D Printing or help others by answering their 3D Printing questions.
I've had this MP Select Mini III for years and years. Lately it's consistently jamming/clogging somewhere between the hot end and the PTFE tubing - but not right away, often...
Asked on 11/17/2021
1 answerI'd appreciate any advice on this problem. I have and Ender 3 Pro with a glass bed. I have been using Marlin 2 with mesh bed levelling and it has...
Asked on 11/15/2021
1 answerPLA is flammable, but a good case can protect the main board from dirt. Is it worthwhile to protect a circuit board with a 3d printed case?...
Asked on 11/12/2021 by Silux
2 answerOne frustration I have with Cura is that it has no way to set print speed in terms of a volumetric extrusion rate, when extrusion rate is the main physical...
Asked on 11/12/2021
1 answerI had filament on my 3D45 coming out of threads on the nozzle. To fix this I removed the nozzle to find the PTFE Liner in really bad shape. It...
Asked on 11/12/2021 by Mike Fotocheez
2 answerI am searching for a Linux software to control the 3000 mW laser engraver depicted below. It's a common model you'd find on AliExpress, Banggood, etc. under different brand names....
Asked on 11/10/2021
6 answerSo basically, I have 3 different types of steppers.A NEMA 23 stepper for the Z-axis,a good quality NEMA 17 for Y-axis andanother lower quality NEMA 17 for X-axis.This setup should...
Asked on 08/26/2021
1 answerMy Creality CR-10 Max is equipped with a BL Touch sensor for bed leveling. The bed size is 450 mm x 450 mm. Here is the 16 measurement points taken...
Asked on 08/26/2021
1 answerI have a Felix Tec 4 (Single Extruder) and at the moment I print for a relatively long time compared to my other prints. Recently I noticed that after a...
Asked on 08/26/2021 by isi_ko
1 answerI have two TMC2208 stepper drivers, both with the exact same problem. They both only allow the motor to rotate in one direction. They are currently used inside a CoreXY...
Asked on 08/26/2021 by Kiro
0 answerGet help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP