TransWikia.com

9/16 pedals wont go in crank - they're too big

Bicycles Asked on September 2, 2021

What about if you have two gears on the crank. I used a 5/8 open wrench to take out my original pedals on my Schwinn Sierra and the new 9/16 pedals won’t go in – they’re too big. What size would it need? I’d like to use an adapter.

4 Answers

First verify that you are in fact trying to screw the left pedal into the left crank arm and the right pedal into the right crank arm. The pedals are sometimes marked with a R and L on the end of the threaded section. The left side is the side your left hand is on while riding. There are 2 common size pedal threads. Many children's bikes, some lower cost department store bikes and some folding bikes use 1/2" thread on the pedal . Most others use a 9/16" thread on the pedal. My guess is you bought 9/16" pedals and they are too large to screw in to your crank arms. While they make adapters to use 1/2" pedals in 9/16" holes there is not one for the reverse. As an alternative you can ask your local bike shop to determine if the crank arm has enough material to modify it to the 9/16" thread. This likely more expensive them getting the correct pedals.

Answered by mikes on September 2, 2021

You can't get an adapter to fit a big pin in a small hole, without pushing the pedals farther apart horizontally. To keep the pedals at he same distance, you'd have to drill out the holes to a larger diameter and then rethread them, which probably isn't practical. Just take the pedals back to the shop for a refund and buy pedals in the correct size (which is apparently 1/2in).

Answered by David Richerby on September 2, 2021

9/16" - 1/2" crank adapters can be found online but do work out quite expensive.

Not an endorsement but an example of what to search for.

I notice the OP asked for adapters but considering the price and the fact with the adapters fitted your pedals will protrude further than normal, my actual suggestion is what others have said above and replace the pedals for 1/2" pedals to fit your crank.

Answered by Dan K on September 2, 2021

It's 5/8" pedals .good luck finding them. Mid school mongoose and schwinn used this size pedal for a few bikes and some old school bikes. I have a mongoose crank and I can't find these size pedals anywhere!

Answered by Julie Petershack on September 2, 2021

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP