Conversion to single speed: crankset specs?

Bicycles Asked on December 31, 2021

I picked up a cheap frame recently which came with bottom bracket, 3x speed chainring, crank arms and pedals, handlebars, forks, and front & rear rim brakes.

I’ve removed the chainring and right crank arm and I want to buy a new crankset but I’m not sure what specs I need to make note of when shopping for it. I know it’s a square taper BB, but other than I don’t know what else I should be looking out for.

What measurements and/or fittings should I have my eyes open for?

One Answer

You'll obviously want to select the appropriate chainring size and crank arm length.

Cranks have a specific chainline (the nominal distance from the chain to the mid-line of the frame). The required chainline is affected by the spacing of the rear wheel dropouts, i.e. a 148mm spaced disc brake MTB frame has a wider chainline than a 130mm spaced rim brake road frame.

If you want to re-use the bottom bracket you'll need a crank with a square taper interface, however there is an annoying issue with matching cranks where the axle is built into the bottom bracket (i.e. '3-piece' crank/BBs: square taper, Octalink etc.): different crank models require a specific bottom bracket axle length to achieve the correct chainline.

Normally, if you can't find a crank that requires the same length axle you have, you'll need to replace the bottom bracket along with the crank. Often, replacing the bottom bracket opens up the possibility of upgrading to a '2-piece' crank with external threaded bottom bracket bearings such as the Shimano Hollowtech II system.

If you are converting a derailleur bike to a single speed (your question is a bit ambiguous as to whether you mean a proper single speed or 'one-by' with a single chainring a derailleur/cassette in the rear) then you can play around with the position of the sprocket on the freehub body to get good chain alignment and chainline isn't important.

Answered by Argenti Apparatus on December 31, 2021

Add your own answers!

Related Questions

Three wheeler pulls to left when riding

2  Asked on December 14, 2020 by fabie


Mounting light on handlebar with bag installed

5  Asked on December 13, 2020 by l-dutch-reinstate-monica


Rusty fasteners

1  Asked on December 13, 2020 by jerr


Determine Rotor and Caliper Size

1  Asked on December 13, 2020


20 inch ebike wheel motor exchange

1  Asked on December 13, 2020 by alan-walsh


Mountain bike tyres, could somebody explain what the markings mean?

1  Asked on December 12, 2020 by english-orchard-haze


Brake Bleed Fail

0  Asked on December 12, 2020 by ben-stokes


Zip ties to hold smart-lock on frame

3  Asked on December 12, 2020


Triban headset reassembly

1  Asked on December 12, 2020 by benisacat


Is 160mm crank too short for me?

5  Asked on December 12, 2020


What is on the handlebars of this bike?

1  Asked on December 12, 2020 by johndanger


Ask a Question

Get help from others!

© 2022 All rights reserved. Sites we Love: PCI Database, MenuIva, UKBizDB, Menu Kuliner, Sharing RPP, SolveDir