AnswerBun.com

Part of Object Goes Through Plane When Falls

Blender Asked by Sanzid Sadman on December 9, 2020

I am using Blender 2.81a and just doing a Domino Animation. But faced a little problem. When the last domino falls, it kinda goes inside the plane and the comes out. But I don’t want that go through. Any solution?

enter image description here

One Answer

As with all simulations, make sure you use realistic properties for your objects - ie, each domino should be a realisic 'real world' dimension with suitable real-world mass and centre of gravity. If need be, set your Scene to suitable units so that your objects do not have to be unreasonably scaled (eg, if working with very large objects set the scale to Kilometres, if very tiny, maybe set to Milimetres or Micrometres, etc.).

Ensure you have 'Applied Scale' to all of your objects. This helps with producing a consistent simulation.

In Scene Rigid Body World parameters consider increasing the Steps Per Second and/or Solver Iterations above the default values (defaults are 60 and 10) - eg, 6000 and 600 would not be unreasonable and shouldn't slow down the simulation too much. Avoid excessively high values as this can result in rounding discrepancies which can affect the stability and accuracy of the simulation. If in doubt, change one value by a factor of, say, 10 and re-try the simulation to see if it makes it better or worse before deciding on whether to change it back and/or change something else. Note that there are no 'universal best values' for these - it depends on your situation and simulation requirements.

If you're still getting intersections, consider enabling the Collision Margin in the Physics properties Rigid Body settings. This defaults of 'off' and can be enabled and a margin set. The default (0.04m - 4 cm) will likely be way too large (depending on your scene units and what it is you're simulating) - try the lowest permitted value first (0.001m (1mm)) and try higher values if still getting collision issues.

Using these changes I managed to get a clean simulation without clipping. If you still cannot get the expected results, please edit your question to add further details.

Answered by Rich Sedman on December 9, 2020

Add your own answers!

Related Questions

mesh.edges.foreach_set() doesn’t update

1  Asked on January 6, 2021 by tortenrandband

   

Glowing Light Trail – Eevee

1  Asked on January 5, 2021 by smail

       

How to color code strips in blender VSE?

1  Asked on January 4, 2021 by blenderuser001

   

Alpha not rendered in movie in the Blender Game Engine

1  Asked on January 3, 2021 by miracles-happen

 

Problem rendering after physics simlation

0  Asked on January 3, 2021 by meerlol

   

Selecting GPU with Python script

3  Asked on January 3, 2021 by user3922088

     

Colour of render is desaturated after saving

0  Asked on January 1, 2021 by user2105725

   

Unwanted black lines

0  Asked on January 1, 2021

       

Lock to Camera to View moves camera position

1  Asked on January 1, 2021 by nof4

 

Objects not showing in viewport on Solid view

2  Asked on January 1, 2021 by gerardo-pea-prez

     

Baking two procedural materials

1  Asked on December 31, 2020 by againstthesun

       

Ask a Question

Get help from others!

© 2022 AnswerBun.com. All rights reserved. Sites we Love: PCI Database, MenuIva, UKBizDB, Menu Kuliner, Sharing RPP