How to vary the voltage output depending on the changes in temperature?

Electrical Engineering Asked by NatD on January 2, 2022

I am working with the Siemens Logo8! PLC (0BA8 version) and the purpose of my circuit seems to be simple:

If temp > 25°C then output voltage = 8V

If temp < 25°C and >15°C then output voltage = 5V

If temp <15°C then output voltage = 2V

Is there a possible way in a circuit of doing this?

I achieved a similar concept by using one Analog Input, then 2 Analog Threshold Triggers connected to a latching relay and eventually to a Digital Output. (Picture attached) However, the limitations of that system is that Voltage can be either 1 or 0.

The concept behind the circuit seems to be simple but I am really struggling to make it work and any hints will be much appreciated.

simulate this circuit – Schematic created using CircuitLab

I'll send invoice on schematic entry cost ;)

and if you don't understand my schematic , try this one which I had no trouble understanding in university undergrad in my day..

Answered by Tony Stewart EE75 on January 2, 2022

Related Questions

How to reduce measuring angle of JSN SR04T?

3  Asked on December 27, 2020 by user193395

Component identification – MELF capacitor? inductor?

1  Asked on December 26, 2020 by mcfudge

Serial Port communication to PC troubleshooting

1  Asked on December 26, 2020

N-channel mosfet turn constantly on after a while

1  Asked on December 26, 2020 by a-m-s

Am I calculating battery life expectancy correctly for this RF receiver?

1  Asked on December 23, 2020 by whiskerbiscuit

Altium won’t let me move object to negative coordinates

1  Asked on December 22, 2020 by mfeinstein

Introducing SiPM Array to an Op-Amp

1  Asked on December 22, 2020 by bestqualityvacuum

Isolated DC-DC Converter screws up ADC

1  Asked on December 22, 2020 by fab

how to deal with ACK and DATA one after the other in I2C efr32fg14

0  Asked on December 21, 2020 by rocko445

LED indicators on Ethernet cables

2  Asked on December 21, 2020 by user3435121

High efficiency pwm current limiter for charging supercap from alkaline battery

0  Asked on December 21, 2020 by juha-mattila

Arduino Mega output at 2.5 Volts and how to pull-down?

1  Asked on December 21, 2020 by tibu-v

Sending SPI signals to the Flash Memory through verilog FPGA controller, but not receiving anything from it, why does it happens?

1  Asked on December 21, 2020 by user176257

Adjusting the offset of the output of a UA741CN opamp

2  Asked on December 20, 2020 by looper

15kV high voltage pulse generator circuit – how to have digital control?

3  Asked on December 20, 2020 by remco-van-gorsel

EMI consideration for Microwave Sensor Module

0  Asked on December 20, 2020 by robg

Is unplugging computer power cable from PSU the same as electricity outage?

2  Asked on December 19, 2020 by simonv