Find answers to your questions about Engineering or help others by answering their Engineering questions.
I need to fixate something at adjustable approximate angles. It doesn't need to have a lot of holding power. So the idea is to have washers/nuts that are serrated, that...
Asked on 12/23/2021
1 answerThe switches are so high it's not possible to see how they function on the ground. I really tried to look up information about this on the internet, but there's...
Asked on 12/20/2021
4 answerWhy is this overdefined? Can't I translate eveything yellow horizontally to the right? ...
Asked on 12/19/2021
1 answerI have created second part on the basis of first one. Why not? Now I can't neither delete nor suppress initial part without deleting or suppresing my new one. Why?...
Asked on 12/19/2021
2 answerI have a small, 5 gallon, pancake compressor which has a maximum 150PSI rating. Unfortunately, it doesn't have the air capacity to power the demands of an HVLP paint sprayer...
Asked on 12/19/2021
3 answerWhen specifying the depth of a cut, should the dimension start from the datum surface or from the surface where the cut will be made? In the example below, a...
Asked on 12/14/2021
1 answerW and H sections look pretty much the same. S...
Asked on 12/14/2021
2 answerSo, I'm doing a group project for a materials and manufacturing engineering class, where our job is to make a product using injection molding. For our project, we chose a...
Asked on 12/07/2021
2 answerI want to use a T/R switch IC to select the filters. So I made a small board test HMC784AMS8GE IC like the schematic below: ...
Asked on 12/05/2021
1 answerFrom ASME-Y14.5, a regular feature of size is defined as "one cylindrical surface, a spherical surface, a circular element, or a set of two opposed parallel line elements or opposed...
Asked on 12/04/2021
0 answerGet help from others!
Recent Questions
Recent Answers
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP