# Sphere in a cube - Thermal conductivity

Engineering Asked by Andrew Sobek on July 28, 2020

So, I’m doing a group project for a materials and manufacturing engineering class, where our job is to make a product using injection molding. For our project, we chose a sphere (keeping it simple)

I’m in charge of calculating cooling time for the part while its in the mold. Herein lies the issue:

I have to figure out how heat (power) flows through our mold, Which can be represented by a hollow sphere in a perfect cube.

The equation for thermal conductivity is (K)(A)(T2-T1)/(L), Where L is the parallel distance of hard object in which the heat has to flow. This equation is set up for a solid, uniform plate, The problem is that the object in which the heat must flow is NOT a uniform object!

So what do I set L as?

I have Schaum’s outline for college physics, and it allows me to define the rest of the parameters. I just need L.

Also, another question: Our mold is being 3-D Printed, to where the mold isn’t truly a solid object; a certain percent is plastic (Given by % infill) and the rest as air. I believe I got the K-value correct for this part but I would like to backcheck -> ((%infill)(K-PLA)) + (100-%infill)(K-air) = K-incomplete_infill

You probably don't need an "accurate" answer here - I guess you really want to know whether to wait 5 minutes or an hour before the molding is cool enough to handle.

A practical way to get an approximate answer would be to take the outside of the mold as another sphere, with an "average" thickness corresponding to the real shape. You know the maximum and minimum thickness of the mold from the size of the sphere and the cube.

This gives an equation for heat flow through a spherical shell (section 2.10).

Of course if you want it to cool down quickly, maybe you should change the shape of the mold so it is closer to a sphere, to reduce the thickness at the corners of the cube.

Answered by alephzero on July 28, 2020

You can find an upper bound to the cooling time by approximating the mold with a simpler shape that you know will take more time than the actual shape. That could mean treating the cube as a sphere whose surface touches the corners of the cube. Then you can confidently decide to open the mold or whatever after that maximum time has elapsed.

You can also find a lower bound on the cooling time by using a sphere the touches the thinnest parts of the cube.

Answered by user1318499 on July 28, 2020

## Related Questions

### Is it possible/practical to mold a single hollow piece of carbon fiber with a sealed vacuum in the middle?

2  Asked on August 11, 2021 by giffyguy

### What type to mechanical joint to achive Slide then Rotation motion

0  Asked on August 11, 2021 by snaier

### How to determine the deflection of a wire mesh under wind load?

2  Asked on August 11, 2021 by mattsons

### What Rubber is Best for Laser Cut McKibbens PAMs?

1  Asked on August 11, 2021 by kirkland

### What are the benefits of a digitally controlled TIG welder?

1  Asked on August 11, 2021 by pibben

### Finding replaceable push pull transformer with similar specifications

2  Asked on August 10, 2021

### Vibration following an impact

1  Asked on August 9, 2021 by ik2

### Why are many compliant mechanisms only flexible in the joints?

4  Asked on August 8, 2021 by beacon-of-wierd

### Why does the yield strength of steel go up if I reduce the thickness of the specimen?

2  Asked on August 7, 2021

### Turndown for a Post-Tension Concrete Court

2  Asked on August 7, 2021

### How to calculate flow rate of water through a pipe?

3  Asked on August 7, 2021

### More efficient to use LED lighting than to open blinds for light and thereby lose heat when very cold outside?

2  Asked on August 7, 2021

### How to calculate mass needed for mounting electrodynamic vibration shaker?

1  Asked on August 7, 2021 by arc

### Restricting rotational movement

1  Asked on August 6, 2021 by akauppi

### Are there any benefits to using a regular washer alongside a lock washer?

4  Asked on August 6, 2021 by twowayspeedoflight

### Alternatives to laser line?

1  Asked on August 6, 2021

### How do I draw moments on hinged gates?

1  Asked on August 5, 2021 by jjrrrmkaas

### Thermodynamic energy balance

2  Asked on August 5, 2021

### Electrical potential and grounding in a circuity, why it works?

1  Asked on August 5, 2021 by highlightxii

### Is it possible to build a DIY RLC circuit for a classroom demonstration?

2  Asked on August 5, 2021 by user128063