TransWikia.com

QGIS - processing area and calculating volume of polygon with know elevation from a DEM

Geographic Information Systems Asked by Exanos on January 28, 2021

I got a DEM of a watershed and I need to create a dam at a fixed elevation (with a rectangular polygon corresponding at the top of the dam) and calculate it’s area (including the slope (fixed value) between the perimeter of the top of the dam and the DEM) and the corresponding volume.

Do you have any idea of the tools I can use for :

  • processing the real area of the dam (ie : including the area of the slope)?
  • calculating the volume of the full dam

One Answer

There wouldn't be a specific tool, but a work flow you could follow to do this. I have done something similar in ArcMap, and can describe the concept.

Firstly decide what the fixed elevation is of your dam. Then you can convert your rectangular polygon to a raster file (matching parameters such as cell size with your DEM). There should be a tool for this.

Now perform a raster function where you subtract your watershed from itself so that you have an empty watershed raster (raster calculator aka map algebra). This will be used later to construct the water elevation raster file. (because: empty raster + 100 = water elevation raster at 100 feet)

note: when creating your empty raster make sure to clip it to whatever you think will actually be the reservoir

Now you can display your DEM, and the water elevation raster on the map. If you perform more raster calculations you can generate a new raster that shows the depth of the water. (water depth would be the difference between the water elevation raster and the dem)

To find area you may consider the basics. area= # of cells * length of cell * width of cell so you could use the water elevation cell count and cell size for this input. Most cells are squares so the length and width values would be the same.

to find volume you can use raster calculator and use the water depth raster as an input then multiply by the length and width of the cells.

You may need to play around with this a bit, but that would be a basic processing flow for your needs.

Answered by nerdsconsider on January 28, 2021

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP