TransWikia.com

Bosch dishwasher not filling

Home Improvement Asked by peteretep on December 25, 2020

I have an older Bosch compact dishwasher – Classixx Maxx Freedom Performance.

I installed it myself simply by mirroring the plumbing on the washing machine nearby – cold water supply and drain through a high loop to the drain.

enter image description here

It worked fine initially, but now has stopped filling correctly.
I can hear the pump chugging away, sucking at air.
Suspecting an air gap, if I pour a few jugs of water into it, the machine runs correctly.

  • What can cause an air gap in a dishwasher to form?
  • What other failures or installation mistakes could cause the dishwasher to fail in this way?

Edit:
After thinking I had searched everywhere, I found the serial number etched on the inside of the door – it wasn’t visible in most light.
Serial number plate

The plate reads:

E-Nr: SR543002GB/20

FD 8310 000470

There is also this long number:

013100231095004706

Here is the bosch support page:

https://www.bosch-home.co.uk/supportdetail/product/SRS43C02GB/20

Further info – a rinse cycle will work fine.
The issue seems to be happening only when I put it on for a wash.

One Answer

Check the water level float switch. This is a device that dishwashers use to control the water fill level (to prevent flooding). It is most often located on the bottom (floor) inside, and usually has a "cap" looking float. When you turn on the unit, the float circuit allows the water inlet to open if (and only if) the float position indicates that the water level is less than full. When the float position indicates that the water level is full, it causes the water inlet valve to close and remain closed until the level is less than full.

A malfunctioning float, float switch, float circuit can cause water level/fill issues. It is not uncommon for them to get "stuck" or get "sticky". Fancy units may use a different type of water level control scheme, like a hidden float or a photo-electric sensor.

Look (real hard) for the label with the model number, it should look something like this:

enter image description here

Answered by Jimmy Fix-it on December 25, 2020

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP