TransWikia.com

Can I replace two 2x4 jack studs with a steel bracket attached to side of adjacent 6x6 king stud?

Home Improvement Asked by Eric Havemann on July 21, 2021

As part of my kitchen remodel, I want to move my refrigerator into a closet. In order for the refrigerator to fit width-wise, I need to remove two jack studs on one side of the closet that are supporting a double 2×12 header which is a bearing wall for the ceiling joists and second floor bedroom.

The header butts up against a 6×6 king stud that the jack studs are nailed to.

My question is:

  • Can I fabricate a steel bracket lag-bolted to the side of the king stud to support the header instead of the studs?

  • Would I need to extend such a bracket down the side of the 6×6 and attach it to a steel plate at the foot so the weight remains supported on the floor rather than hanging on the side?

  • How thick should steel plate be?

(Note in the pictures there is a third stud which I removed, shown in the location where I pulled it from. The bracket would replace this stud as well)

View from inside closet
enter image description here

View from outside closet (bracket would be on the left hand side)
Removing the studs frees up the three-inch space to the right of the 6×6 post
enter image description here

Bracket Idea
enter image description here

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP