TransWikia.com

Problems with reassembling Bosch POF 1200 AE router

Home Improvement Asked by physicsboy on June 20, 2021

So in my infinite wisdom, while removing one of the springs from my Bosch POF 1200 AE router I accidentally took the router motor out of the housing itself.

When I removed it I heard click, click and thought nothing of it until I tried to reinstall the motor into the housing, and after a bit of investigation it looks like there’s some… brushes or something blocking the top bearing going all the way in.

enter image description here

From the pictures I took and from the online instructional diagram it seems that they sit in the brass-looking areas either side, however my fingers and pliers aren’t long enough to get in there and reseat them.

I did manage to use a pencil to navigte and one into the brass seat, but there is some sort of spring mechanism that forces it out; I’m asssuming this to make these brush-things contact the router motor to make it run shrugs.

enter image description here

Can anybody help me make sense of this and how to fix it such that I can successfully reassemble my router?

One Answer

I usually find a way to hold the brushes back in the holder against the spring pressure.

Either a wire loop tying each brush back or some brush holders have holes to insert a pin through - there can be many options to consider, but there has to be a method to assemble it.

Once the armature is back in position then remember to release the brushes.

Answered by Solar Mike on June 20, 2021

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP