TransWikia.com

Can alignment of the bed rails of a Speed Graphic be repaired?

Photography Asked by ToastHouse on June 18, 2021

I own a Speed Graphic (not sure how old but anyways) that is in almost perfect condition (from a working point of view) the focal plane shutter works at all speeds, nothing is really damaged, etc, except for one problem that doesn’t really impact performance; the camera will not close. I traced the issue to the inner bed rails not aligning and the plastic kind of part inside appears to be damaged (the white part circled in red)

enter image description here

Here is a view of the inner bed rails bent from the side

enter image description here
enter image description here

Technically I can close it, if I press down on the inner rails, but sometimes the bellows part of the camera comes off of alignment and it is a hassle to put it back on the rail.

This really depreciated the value of the camera, is there anything that can be done about the broken parts?

2 Answers

The white plastic pieces don't look like they belong. When comparing your photos to my Crown Graphic, the bed and rails appear the same but I definitely don't have anything that looks like the white pieces in your photo.Your hinge doesn't appear to be out of alignment, so I'm thinking that someone placed something under the inner section of railing to shim it up for some reason.

I would try to remove the rail guides for that short inner piece of railing and take a better look at the plastic and possibly remove it. Unfortunately, I think you may first need to remove the connection to the rangefinder in the back left.

Correct answer by user7264855 on June 18, 2021

I think this is a body condition, I have a mint condition (as in not seen much use) Century Graphic where the rear rails lift slightly as they are wound back into the body. From what I can see, I think the bed on which the rear rail guides sits are a little proud. I suspect it's a manufacturing inaccuracy. An idiosyncrasy that does not affect photo taking, and I don't think it's unique to your camera. The plastic bits referred to appear to be alloy deposits from the slight misalignment.

Answered by Addinsell on June 18, 2021

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP