Are you looking for the answer to the question: What Does Load Optimal Defaults Mean? We have gathered for you the most accurate and comprehensive information that will fully answer the question: What Does Load Optimal Defaults Mean?
What Happens When You Load Setup Defaults? Your BIOS also contains a Load Setup Defaults or Load Optimized Defaults option. This option resets your BIOS to its factory-default settings, loading default settings optimized for your hardware.
If you have already installed Windows in Legacy mode, then you want to install Ubuntu in Legacy mode as well. In this case, you should disable OS optimized defaults. Otherwise you may not get the option to boot to Legacy mode, after you reset the UEFI to default for any reason.
A BIOS reset will erase BIOS settings and return them to the factory defaults. These settings are stored in non-volatile memory on the system board. This will not erase data on the system drives.
When you reset the BIOS to factory settings, it doesn’t erase any data or change the configuration of the Windows operating system. It only resets specifications such as boot order, BIOS password, hardware configuration and so on. So you don’t have to worry about losing your data or Windows while resetting the BIOS.
Once the key is written, secure boot enters User Mode, where only drivers and loaders signed with the platform key can be loaded by the firmware. Reset to setup mode option clearing the PK will set you back to Setup Mode from User Mode.
Restart machine, press F1 to enter BIOS, press F9 to load default settings, and press F10 to save.
Clearing BIOS settings will remove any changes you’ve made, such as adjusting the boot order. But it won’t affect Windows, so don’t sweat that. Once you’re done, make sure to hit the Save and Exit command so your changes take effect.
What is the default boot order? The default boot order settings for the computer are configured in the factory. The default boot order determines what the computer boots to first.
Resetting the bios shouldn’t have any effect or damage your computer in any way. All it does is reset everything to it’s default. As for your old CPU being frequency locked to what your old one was, it could be settings, or it could also be a CPU which is not (fully) supported by your current bios.
Solution Restart the PC and press F1 to enter Setup. For ThinkPad: Navigate to the RESTART menu. Select OS Optimized Defaults and change the value to Disabled. Select Yes to continue to disable the OS Optimized Defaults.
A default hardware configuration (or “default config”) is a prebuilt system with standard specifications. This includes standard components such as the CPU, RAM, storage device, and video card.
BIOS updates will not make your computer faster, they generally won’t add new features you need, and they may even cause additional problems. You should only update your BIOS if the new version contains an improvement you need.
A vulnerability has been detected in the BIOS chips found in millions of computers which could leave users open to hacking. A vulnerability has been detected in the BIOS chips found in millions of computers which could leave users open to hacking.
Try disconnecting the hard drive, and power on the system. If it stalls at a BIOS message saying, ‘boot failure, insert system disk and press enter,’ then your RAM is likely fine, as it’s successfully POSTed. If that’s the case, concentrate on the hard drive. Try doing a windows repair with your OS disc.
Secure Boot is a feature of your PC’s UEFI that only allows approved operating systems to boot up. It’s a security tool that prevents malware from taking over your PC at boot time.
The Delete all keys option deletes all keys in the system, including the Platform Key. IMPORTANT: After you delete all keys, the system is forced to immediately disable Secure Boot. Secure Boot remains disabled upon system reboot until valid secure boot keys are restored.
When enabled and fully configured, Secure Boot helps a computer resist attacks and infection from malware. Secure Boot detects tampering with boot loaders, key operating system files, and unauthorized option ROMs by validating their digital signatures.
Use a straightened paper clip in the reset hole to reset the laptop. On other laptops press and hold the power button for at least 10 seconds. Some ideapads have a Novo button that can be used to get to the BIOS or recovery mode. If the reset works, then there may be an issue with the power button.
Get help from others!