Seasoned Advice Asked by kokoto on June 19, 2021
I use a sugar and glucose syrup mixture and use it to form candies in demonstrations in front of people. When I use it it is between 80 and 90°C. This mixture is prepared ahead and then transferred to a rice cooker until hardened.
Whenever I need it, it takes about 1.5 hours to melt it back completely (rice cooker has to reach 100°C several times) and then I have to wait until it cools down around 80 – 90°C. Around one or two hours later I have to launch it again as it cools down to 70°C (the normal maintaining temperature of a rice cooker). Then I launch it again to heat it up, it gets up quickly to 100°C, and then I have to wait again until it cools down to 80 – 90°C to use it. And the cycle goes again and again.
The fluctuation of 30°C is too big so I am trying to find a different type of container that would allow me to melt down the hardened sugar mixture, then maintain it between 80 and 90°C.
As it is used for demonstrations, I need something that won’t take too much space (I had a sort of electric/induction burner with temperature control, with a pot on top, but it takes some space and is too loud)
What I was thinking: Electric soup kettle, I believe the product is similar to a rice cooker, but for some there is a temperature controller (I was thinking of this one https://www.bartscher.com/en/Products/Snack/Soup-pots/Soup-kettle-54L/p/100062, you can find technical details on "downloads"). The only thing is that it is clearly said to be used for soup to be heated up, so would it change so much?
If you have any suggestions, you are very welcome to say so ! 🙂
If you need to maintain a certain temperature over time, this is the domain of sous vide cookers. They are typically made for proteins, so if you cannot find one that goes to 90 C, you can use a homemade setup instead (controller + drop-in heater + small pump). It will serve you much better than any purpose-made device, unless you can find something exactly for your use case. If you go with sous vide, don't immerse the heater or pump into the syrup, use a second container (a simple pot will work).
I would be somewhat worried about the long holding though. This is simmering temperature, and you will be losing moisture all the time, changing the ratios in your recipe. Also, I assume you are not making standard hard candy, as the temperature is too low for that. If you have other ingredients, they may not take well to being kept heated constantly, for example if you are making gummy candy, gelatin will not work well (or at all) after being kept for several hours at 90 C.
Answered by rumtscho on June 19, 2021
If your amount of syrup is not more than a few liters, you could get a laboratory hot plate (disclaimer: this was just the first link that appeared to me) with temperature control. They exist with temperature feelers, and many support magnetic stirring, too.
(I had this idea because I remember a school experiment where we created fructose-glucose syrup from sugar in exactly such a device, by letting it stir for a couple of hours with a small amount of some organic acid.)
Answered by phipsgabler on June 19, 2021
Best? That would be The Control Freak. However, the downside is that it is fairly expensive.
Answered by moscafj on June 19, 2021
Get help from others!
Recent Questions
Recent Answers
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP