Connecting a 3.5mm Microphone on headset (Logitech G230) to a mixer (Behringer 1202)

The headset microphone needs plug-in-power (sometimes shortened to pip). The most convenient way I know of is to get a XLR phantom power to pip connector. Lowest price I know of is the Rode VXLR+ (Note: the VXLR without plus does not deliver power to the microphone and does not help). The mixer outputs 48V phantom, the plug converts it to the pip voltage (around 5 V or so) and passes through the mic signal.

And no, a normal DI box will not help.

There are probably alternatives out there on the net. The microphone needs a few volts of power to work, as given to it from the pip system. You could build a box to do that quite easily: it takes only a battery and a few cheap and simple components. If you search the typical chinese web pages for electronics it ought to show up.

The easiest method would be using an adapter from 3.5 to 1/4 jack like this one http://ecx.images-amazon.com/images/I/41uY1MBNcAL.SY300.jpg

The tricky stuff is that the headset outputs it's mic in stereo, even if it's mono so you might get some artefacts. I'm using an berry mixer (qx1002) with this type of converter to capture foot stomps and beats and it works great for this application